jackery's blog

Focus adjustment: This is a good choice when you want to widen or shrink the beam. This is ideal for Burning Laser Pointers because you can focus the beam to increase its intensity or use it for applications such as goose control to widen the beam. In optics teaching, the advantages of using a laser pointer as a light source are that it is light and portable. The pen can be moved arbitrarily in the hand, which is very convenient. Because of the high power density of the laser, the thin beam and the small divergence angle, the energy of the laser beam is highly concentrated and the brightness Very high, the only thing to be solved in the geometrical optics demonstration experiment is the optical path display problem. Due to the good directionality of the laser, in pure media such as air, water, and glass, we can only see the spot where it is irradiated, but the light path cannot be seen. Using light scattering, this problem is extremely easy to solve: when demonstrating the linear propagation of light, the reflection of light and the deflection of light after prisms and lenses, it is only necessary to spray smoke at the light path (lighting incense).
Smoke, mosquito coils, etc.), the light path is clearly displayed.

The Laser Pointer can also magnify the display of some small changes in the demonstration experiment of mechanics and thermodynamics, such as the small deformation of the demonstration object, the small change of the pressure, the small vibration, thermal expansion and contraction, etc. which are not easy to be observed by the naked eye. Phenomenon, the tail of the laser pointer can be used as a fulcrum, and the tip of the pen is closely connected to the changing area. In physics teaching, the light source of the existing optical demonstration experiment is not satisfactory: large, heavy, and difficult to adjust; although the output power is large, the utilization rate of light energy is not high; the adjusted beam is coarse, divergent, and not bright enough. You must be in a dark room to see clearly. Due to the scattered light, when demonstrating reflection and refraction phenomena, the quantitative value of angle (incident angle, reflection angle, refraction angle) cannot be accurately seen on the optical disc.

The single-hole diffraction experiment can also be done with a laser pointer 5000mw: Punch a small hole in the center of the paper cut above, the hole should be smaller, and the paper should be pre-dipped in oil or cut into paper with opaque wax paper. After the hole is punched, there will be no small fibers in the hole. Similarly, stick the paper sheet in front of the lens of the pen head, screw on the pen head cover, and open the switch, you can see that the light spot is larger in the dark place than when the paper sheet is not added, and the light spot is larger.
The spots are composed of concentric circles of light and dark.

It is understood that this year's CCTV 3.15 party experts have a laser pointer Infraot with a power of 4500 milliwatts. The moment the laser launch is turned on, a dozen balloons are lifted up. It took a while for the Burning Laser Pointers to aim at the dark clothes and found a hole in the clothes. The infrared laser pointer shone on the match head, and after a while, it burst into flames. The power of the laser diode is mainly used to generate a single-wavelength excitation resonator beam, that is, the intensity of the laser pointer. For lasers, power is an important indicator of energy released per unit time.

In March of this year, the General Administration of Quality Supervision, Inspection and Quarantine issued the "50mw Laser Pointer, Laser Gun Children’s Product Quality and Consumer Safety Risk Warning Reminders", stating that children should not buy laser pointers as toys and consumers should avoid using laser pointers to illuminate human eyes. , Skin, clothing and other places. The General Administration of Quality Supervision, Inspection and Quarantine reminds consumers to check the packaging, try the product or confirm with the seller whether the toy laser is confirmed when buying children's toy guns. Consumers are advised not to buy toys with laser pointer 5000mw aiming gun, laser shooting function or children's function. When purchasing related products, you should carefully consider whether it belongs to the category of laser radiation. It is recommended that you use more laser toys and stop immediately.

Laser difference in the laser market

Compared with the previous laser 20000mw market, laser pointers have developed towards higher output power and multiple colors. At the same time, a large number of manufacturers and distributors withdrew from the laser pointer market, which made laser pointers a mass market. The sloppy laser pointer is also significantly lower than the real laser crystal. Any time you choose a laser pointer that people can see clearly and observe, it is the real purchase.

This technical genius built it all in one hand. A miracle found in the video. The YouTube user used a robot toy on which he placed a 2W laser, which is a very powerful accessory used in the industrial field. Remotely controlled, this machine can burn paper and even explode inflated balloons. As the boy said, this laser can also cause great damage to the eyes, so you must wear appropriate glasses when using it. Laser pointer Green is the laser pointer color of choice for astronomy, because green is the most obvious green laser pointer color. Green is more pronounced because human eyes are more sensitive to green light. Another reason is the influence of light in the earth’s atmosphere: when the atmosphere expands, the light in the sky is visible, and low wavelengths are more dispersed than high wavelengths. Green is a medium wavelength, so it spreads more and more clearly than red and other long wavelengths.

The authorities hope that the billboards in the city and 12 other metropolitan areas across the country will attract the public's attention. Public service announcements are also broadcast on the Clear Channel radio station. A federal law passed in 2012 made it a crime for non-radiation laser pointers on aircraft in service. According to Texas law, this sentence is imprisonment for five years and a fine of US$250,000 in June. Lighting a plane with a 200 MW red laser pointer is a Class A misdemeanor, with a maximum penalty of imprisonment and/or a fine of US$4,000.

Generally, plasma oscillations are excited by a single pulse of a very high-intensity blue laser pointer, but theoretically it has been shown that large plasma oscillations can also be driven by a series of low-intensity pulses. This will allow the use of desktop lasers for plasma acceleration instead of using a nationwide facility. In this context, the L4A group focused on developing a laser suitable for driving plasma oscillation through a series of laser pulses to build a 1 GeV electron accelerator operating at 1 kHz.

It is said that the Gatling laser gun can hit the drone from 500 meters away. Lasers can also detonate explosives and shells, make sensors on other ships malfunction, and even burn holes in smaller ships. The high-energy laser effector has the advantages of high precision, scalability, suitable for a variety of combat situations, and can be used on land and sea, etc., and will occupy an important place in the future armament family. This Laser Pointer seems to give people a very powerful feeling. In fact it is really powerful. The Gatling laser pointer is portable and has richer applications. It is a good guide for your travels and a good tool for pointing to distant targets or stars and sending out distress signals. In addition, this laser pointer is also the best gift for family and friends. The body makes the laser light at night come alive and unique.

From the appearance point of view, this laser cannon is much larger than an ordinary laser pointer. The power of an ordinary Burning Laser Pointers is about 100 milliwatts, while the power of this laser cannon has reached several thousand or even tens of thousands of milliwatts. So where is such a high-power laser cannon mainly used? The sawdust began to smoke after being irradiated with the laser cannon for 2 seconds and caught fire within one minute. Obviously, the energy emitted by the laser cannon is huge, and it is very likely to cause a fire if it is used to irradiate flammable materials.

In the introduction of the laser cannon, we saw that this high-power laser cannon can light up cigarettes and newspapers, so what about using a red laser pointer cannon to irradiate flammable and explosive fireworks? The laser cannon can ignite flammable materials such as fireworks and firecrackers in an instant. What is the principle? Experts tell us that because the laser is focused, the energy emitted by the laser cannon can instantly form a high temperature at a certain point, which is much higher than the power generated by the focusing of sunlight under a convex lens.

The laser-treated surface makes the workpiece more resistant to load. Laser quenching, melting and coating improve the load-bearing capacity of the workpiece. Improve the hardness and toughness, change the surface structure and generate pressure tension or protective coating on the surface. Laser marking and laser pointer 5000mw micromachining can also change the surface of the workpiece. The principle of laser quenching: the laser beam heats the surface of the metal and quenches it to increase its hardness. The advantage of laser hardening technology is that it can process irregular 3D workpieces, with few follow-ups. Due to the extremely low heat input, the deformation of the workpiece is very small, reducing further processing or even no further processing.

What is an excimer laser?

A gas laser that uses a mixed gas of rare gas and halogen gas as the medium and is mainly excited by pulse discharge. Representative examples include ArF excimer laser (wavelength 193nm), krypton fluoride (KrF) excimer laser (wavelength 248nm), and other XeCl excimer lasers (wavelength 308nm) capable of emitting deep ultraviolet (DUV) light with strong light intensity ), XeF excimer laser 20000mw (wavelength 351nm). Excimer laser, as a laser in the ultraviolet region, has the characteristics of high-efficiency excitation and relatively small device. It is suitable for use as a light source for cutting-edge semiconductor exposure equipment that requires high resolution. It is also used in various fields such as industry and medical treatment (laser myopia correction surgery such as LASIK).

Why is the laser pointer restricted?

Initially, red laser pointer were used to point charts and projector images in presentation and educational environments. Lightweight, easy to carry, it can be used even in dark places, and it has the advantage of being able to point to a long distance that the pointer cannot reach. It is said that its application range is expanding. Using an ordinary laser pointer, the range of light is 100 to 200 meters. It is very likely that illegal high-power lasers have been used in criminal activities. The Osaka and Kyoto Prefectural Police Departments, which learned that such illegal products are sold on the Internet, have launched investigations.

In the past, laser pointers have had a series of problems in Japan and overseas, such as accidents in which children accidentally irradiated their eyes and spectators irradiated athletes with light during sporting events. To this end, the 2001 Consumer Product Safety Act stipulated it and formulated safety standards to limit the output power of products sold to less than 1 milliwatt. However, there is no law that regulates personal use or possession of high-power laser pointers. The current situation is that the behavior of obtaining through overseas websites, like the one caught this time, has not been punished.

Some people are high power laser pointer enthusiasts, they have everything from the main product to the place where they get it (maybe they made it themselves). If you have never seen a laser pointer, you may not have read this article, but as you know, most of the lasers used in laser pointers are red or green. This is because it depends on the color of the laser diode that generates the light. As red, green, and blue (RGB: the three primary colors of light) three light-emitting diodes are widely used in various fields, it is doubtful whether there is a blue laser pointer, it does exist. However, there are not many products as blue laser pointers, because the diode itself was invented late and its use value is not great.

Laser pointers classified by color

Red: The structure of the red light laser pointer is the simplest. The reason why it is simple is that the red light laser pointer is basically just a diode with a battery as the energy source. And there are laser diodes that generate this wavelength. The red laser pointer first appeared in the 1980s. It is a large and heavy device worth hundreds of dollars; it is very small and very cheap.

Green: Some green laser work in pulse or quasi-continuous mode to reduce cooling problems and extend battery life. The announced green laser, which does not require frequency doubling, has higher efficiency. Even low-power green light can be seen at night due to the Rayleigh scattering of atmospheric molecules. This laser pointer is often used by astronomy enthusiasts to point stars and constellations. The green laser pointer can have a variety of output powers. The 5mW green laser is the safest to use and is also visible under dim lighting, so no stronger power is needed for pointing purposes.

Blue: blue laser pointer are both rare and expensive because they are not yet widely used. Most of the laser wavelengths used are 450 nm and 460 nm, but some 405 nm lasers are also sold in blue. However, this 405nm is closer to purple than blue as the color. Originally, the visibility of blue itself is not as good as that of red, but 405nm is particularly poor, so it is not a recommended color.

This article mainly introduces the main laser pointers and selection considerations, but I personally think that visibility is very important, so I recommend green. However, because of the high price, if you exceed your budget, you can use the red one, which is very functional. Of course, you pay for what you pay for. If you don't need to replace the laser pointer frequently, you can consider choosing.

For most yellow high power laser pointer lovers, the most common device is the green laser pointer. Due to the high power consumption and high beam visibility and brightness, the green laser pointer not only allows many of us to enjoy and comfort, but it is also one of the most popular gadgets in the world. From a radiation point of view, this is the most common and most often the most important aspect is the potential laser pointer. It is important to compare different colors and laser pointer output, because everyone has different opinion factors.

In the entertainment industry, you would not believe it, but lasers are very popular in the entertainment industry. There is even a song called Laserlicht (David Guetta ft. Jessie J). In any decent discotheque, you can find a light show guided by a green laser beam. The blue laser pointer is even more expensive. These developments are completely related to materials, and materials have not developed to this level. There is no yellow laser.

In the yellow-orange range, laser pointer 5000mw diodes can be used as compact wearable devices for medical blood control applications, ophthalmology surgery, displays, industrial spectrum analysis, sensing and compact optical atomic clocks with less than 10-16 frequency uncertainty. It is very difficult to generate a yellow laser. It is a so-called DPSS laser. This includes an infrared laser diode and a so-called combination crystal. This pair of crystals produced laser light that was later visible. The combined crystal obtains energy from the IR diode. Using a green laser, the rear crystal produces a 1064nm laser, and the second crystal doubles the frequency -> halves the wavelength. So you got 532nm. That is the green light. However, the first crystal has the characteristic of generating weak lasers at 946nm and 1340nm. This is usually filtered out because the green laser does not need it. If you want to produce a yellow laser, you must rely on 1340nm. If you double this frequency alone, a red laser will be emitted. If you mix red and green light, you will get yellow light.

The laser flashlight is a semiconductor laser. The reason why it is different from the 3w laser pointer is that its volume is easier to dissipate heat. The laser module is directly connected to the aluminum flashlight shell to contact the Q-Line fiber green semiconductor laser flashlight. Generally, the flashlight module is relatively thick. Is the eye injury caused by the laser pointer appear immediately or later? High-power laser, direct sunlight with sunglasses or dangerous sunglasses can only block the glare, and the direct heat of the laser will only reduce a little. As long as the eyes are not directed, it will not It will damage the eyes.

What does FDA compliance mean? Well, it must have a certain quality and be considered to meet FDA standards. This is because red laser pointer may be "temporarily dangerous" to others and must meet certain criteria to be approved. There are many laser products whose power far exceeds 5mW. Some of them are advertised as recommendations, which is the real problem. You may have seen laser pointers mentioned in other terms, such as laser pointers, which reduces the seller’s responsibility to promote products.

Also known as star pen, 500mw laser pointer, laser pen, green light pen, hand-held laser. It is named because of its very intuitive visible strong beam, which is mostly used for indication. Because of its bright beam and strong resistance to stray light interference, it is named More and more are used for teaching/astronomy pointing stars, fixed-point guidance, etc. It is the first choice for laser lovers/astronomy enthusiasts and outdoor activity enthusiasts. It can also be used as high-end gifts for relatives and friends.

If you want to buy a 2000mw laser, pay attention here. Generally speaking, there are low-power and high-power laser pointers. According to people's needs, various laser pointers have appeared one after another. Considering safety and practicality, low-power laser pointers are more practical in daily life. For example, the 20mw laser pointer I want to introduce is like this. It looks like a pen and makes you feel close.

The risks of different types of lasers

Laser classification is divided into different power sectors, ranging from class 1 (lowest power) to class 4 (highest power). Laser classification is directly related to the beam output that the long range laser pointer can produce. Let's take a look at each category. Class I laser: For very low-power visible light, the beam emission power is less than 0.39 mW. Due to direct or reflected illumination, these beams are not dangerous to the human eye. There is no risk of skin burns and no risk of material burns.

There is no detailed function, but the basic part is the same as the Japanese standard products purchased by PSC and sold in Japan, and the price is about 20,000 to 30,000 yen. First of all, just because it is the PSC standard does not mean it is high-quality, and the PSC examination standards do not require high-quality examination items. There are some problems with performance stability, but just because it is a PSC standard product does not justify its high price.

Camping is a fun activity, you can be your beautiful family here. The Green laser pointer is an important tool you should buy so that you can enjoy your vacation. It is one of the most important emergency equipment you should carry on a camping trip. High-power laser pointers are provided to help store the production of life, they hover and are bright enough to make the animals bright enough. In these cases, long-range aircraft and other research can be used as backup signals, and laser pointers can be used as another useful survival tool.

Power is the amount of power or energy emitted by the laser. Although most of the lasers we carry can measure in milliwatts or thousandths of a watt, our high-power laser models measure in watts (W). Generally speaking, the higher the power, the higher the brightness of the laser. If you compare lasers of the same wavelength and the same model, this assumption is correct. However, when comparing different wavelengths with the model, this assumption quickly collapses.

Advantages of laser pointers in camping

1. The high power laser pointer is used as a powerful tool for detection, signal transmission and search and rescue. Can give you directions from far away when you get lost.
2. One method is to use smoke signals, and a simpler and safer method is to use high-power visible green laser beams.

Can you buy such a powerful laser pointer here?

Htpow is a professional wholesale and sale of high-quality blue laser pointer. If necessary, please log in https://www.htpow.com/https://www.htpow.com/