© Copyright Our Wall
Compared with wired gps positioner, there are relatively more installation locations to choose from, especially the wireless hidden gps tracking device, which basically has an iron location and can become an alternative location for device placement.
The most commonly installed locations are near the rear and trunk lights, doors, seats, and under the car. So, if the owner wants to place the hidden gps tracking device at the bottom of the car, how should it be correctly placed at the bottom of the car?
Installation precautions
1. If the car mainly wants to place the locator at the bottom of the car, it is first necessary to ensure that the selected bottom position will not affect the vehicle, the temperature is low, there is no metal material around, and the strong magnetic adsorption of the equipment is not easy to be found.
2. When installing the GPS device, do not surround the place where the signal is transmitted and the iron side. Although GPS can be transmitted left and right, the signal is strongest toward the sky, because the satellite positioning is toward the sky.
Installation method
If the location meets these conditions, then the device can be "waterproofed." Since the bottom of the vehicle is easy to contact rain and is very unfriendly to the equipment, if you want to install the equipment at the bottom of the car, you can put something like a waterproof bag on the equipment to wrap the equipment and prevent rain from wetting and damaging the equipment. After making sure that the sealing and waterproof measures of the equipment are done, the equipment can be directly adsorbed at the bottom position.
Check whether the device is securely installed
After installing the positioner, the owner can try to pull out the device with a small force, if the location of the device does not move, then it proves that the device is firmly installed, as long as the device can be positioned.
hidden gps tracking device https://www.eelinktracker.com/Magnetic-GPS-Tracker/
Performance of dongzheng 24v dc motors:
1. dongzheng 24v dc motors is manufactured according to international technical requirements and has high scientific and technological content.
2, space saving, reliability and durability, strong overload capacity, power up to 95KW or more.
3, low energy consumption, excellent performance, reducer efficiency of more than 95%.
4, the selection of low vibration, low noise, high energy saving, high-quality forged steel material, steel cast iron box, gear surface through high-frequency heat treatment.
5, after precision machining to ensure the parallelism and positioning accuracy of the shaft, all of which constitute the gear assembly of the gear drive motor configuration of various types of motors, the formation of mechanical and electrical integration, fully ensure the use of product quality characteristics.
6, the product adopts the series, modular design idea, with a wide range of adaptability, this series of products have a lot of motor combinations, installation positions and structural solutions, can be selected according to the actual needs of any speed and a variety of structural forms.
Advantages of dongzheng 24v dc motors:
The dongzheng 24v dc motors reducer is characterized by high efficiency and reliability, long life, simple maintenance and wide application. Its series is divided into single-stage, two-stage and three-stage gear motors, and the installation and configuration methods are mainly expanded, coaxial and shunt.
1, two-stage cylindrical reducer expansion type, the gear relative to the support position is asymmetrical, the shaft torsion deformation, the load in the tooth width uneven distribution, shaft design should have a large stiffness, so that the gear away from the input or output end.
2, two-stage cylindrical reducer shunt type: shunt type reducer prominent shaft position can be extended from either side, easy to configure the whole machine, shunt gear are processed into bevel teeth, one side right turn, left turn, offset shaft force. To avoid getting stuck in the gear, make sure that the shaft on one side can travel slightly axially.
3, dongzheng 24v dc motors: compact radial size, large axial size. Because the intermediate shaft is large, the interference of the shaft loading is large, and the load concentration along the tooth width is serious. In addition, because the center of the 2-stage gear must be consistent, it is difficult to make full use of the carrying capacity of the high-speed gear, and the bearing lubrication in the middle part of the reducer is also difficult. The input and output ends of the reducer are located at both ends of the same axis, imposing restrictions on the overall configuration of the actuator.
dongzheng 24v dc motors https://www.dydzmotor.com/32mm-24v-dc-planetary-gear-motor.html