© Copyright Our Wall
For the new equipment hydraulic cnc pipe end forming machine, the oil problem has little impact on the noise generation, because the newly added hydraulic oil is in line with the requirements, and the noise may be caused by insufficient oil volume resulting in the sound of air inhaled by the oil pump, or the motor oil pump itself is faulty. However, for the sudden abnormal noise of the equipment used for a long time, it is necessary to check the oil product, clean the oil tank and the oil filter, and solve the abnormal noise problem.
And pipe cutting machine and pipe shrinking machine and other pipe processing machinery in terms of quality and technology is now increasingly mature and stable, not like the past because of the birth of a new product and new technology, we are in a state of exploration, so the stability of the performance of the machine is relatively fragile, but today's pipe processing equipment is in a stable and routine, So after purchasing the machine tool, as long as you carefully maintain the machine tool, it can be used for a long time.
In this way, when the cnc pipe end forming machine inserts the pipe into the mandrel, these small iron pins will fall out, and the iron pins that are not cleaned up will fall into the oil tank inside the fuselage. We all know that the hydraulic oil is input by the oil pump and the solenoid valve provides hydraulic power. Therefore, most of these iron pins will be filtered out by the filter screen in our oil inlet pipe after entering the fuel tank, but there will also be a small part of the iron pins into the oil pump, so that the iron pins that are sucked into the oil pump will enter the solenoid valve, and these iron pins can not flow in the solenoid valve, resulting in the blockage of the hydraulic solenoid valve. And the hydraulic oil can not flow, so there will be a corresponding action failure, resulting in the hydraulic cnc pipe end forming machine can not work normally. Even if this phenomenon occurs, there is no need to panic, as long as you manually press a certain action according to the keys on the control panel, and then look at the indicator light on the solenoid valve to determine which solenoid valve does not work, and then close the movie. Then use a 4mm hex wrench to remove the solenoid valve fixed on the oil distribution plate. Clean the solenoid valve with clean kerosene, blow the inside clean with an air gun, clean the iron pin inside, and then install it to solve the problem.
But what problems often occur in daily use? In fact, these problems we as early as in the previous log technical article also mentioned, today we in the old cliche, usually there will be problems in the hydraulic area, because the machine in the bending of the pipe, the use of metal circular saw cutting will leave a lot of small iron pins. If these iron pins are not cleaned up, they will be directly taken to the cnc pipe end forming machine for pipe bending. However, many automatic cnc pipe end forming machine molds are equipped with mandrel for bending, because they are afraid of insufficient fullness. So it will wrinkle or collapse in and so on.
cnc pipe end forming machine https://www.john-sheng.com/CNC-Tube-End-forming
This article describes the flexible design features in the high quality din 41612 type r connectors, including optional terminal position assurance and a full range of options for each application and orientation. This flexible application design enables the product to meet different needs and provide a variety of connectivity solutions for a variety of application scenarios and directions.
The high quality din 41612 type r connectors are designed with flexible design features and provide multiple connection options depending on user requirements. One of the important features is the optional terminal position guarantee function, which can choose a single or double row design, and install the connector according to the actual situation. This design feature reduces the terminal disconnection caused by assembly errors, prevents connection errors, provides stable and reliable connection performance, and ensures the stability and reliability of the system operation.
Another design feature for flexible applications is a full range of options for every application and direction. Different application scenarios and connection needs may require different types of wire-to-wire connectors, such as different sizes, shapes, or pin configurations. high quality din 41612 type r connectors offers a full range of options to meet the connection needs of different applications and orientations, providing users with flexible and adjustable connection solutions. Whether it is vertical connection, horizontal connection or other connection direction, you can find the right product options.
With flexible design features, high quality din 41612 type r connectors provide a variety of connectivity solutions to meet a wide range of needs. Whether it is home appliances, industrial equipment, communications equipment or other applications, these products can provide stable and reliable connectivity to meet the needs of different application scenarios.
high quality din 41612 type r connectors https://www.kujunconnector.com/TYPE-R-Connectors
One: better tightness
18l sealed round pail manufacturers also produce and process a variety of 18l sealed round pail specifications, this sealed barrel can be used to store a variety of commodities, such as color paste, super glue, lubrication fluid. However, for the water-soluble substances such as color paste and lubricant, better tightness is needed to ensure the shelf life of the product.
Two points: Select according to the actual main use
According to the use of plastic pigment packaging bucket, plastic glue packaging bucket, etc. The outer packaging drum manufacturers produce this kind of 18l sealed round pail has many benefits, compared with other outer packaging drums, 18l sealed round pail price is more cost-effective, because the raw materials are very common. The quality is very good, its own material is very light, and it will become very convenient on the road of handling, and it is not as easy to break as FRP products.
Three points: Anti-corrosion
18l sealed round pail is a machine that is exposed to solar wind and rain all year round, and the O2 in nature also has moisture that will cause it to erode, especially in the air. In addition, when we choose corrosion-prone equipment to ensure, we can choose metal manufacturing barrels, so as to effectively avoid property damage.
18l sealed round pail https://www.plasticsproduct.com/Sealed-Round-Pail-18L.html
In recent years, high quality bubbles cow mat has been widely used in many fields. What are the functions and uses of high quality bubbles cow mat? Here are some answers.
The role of high quality bubbles cow mat
1. It has good elasticity and resilience, and can absorb shock and vibration well.
2. It has good insulation performance and can effectively prevent the current from passing through.
3. It has good water insulation performance and can prevent water penetration.
4. It has good oil resistance and can resist the erosion of a variety of oils and chemicals.
5. It has good weather resistance and can be used under various climatic conditions.
Use of high quality bubbles cow mat
1. Tire manufacturing industry: In the tire manufacturing industry, high quality bubbles cow mat is used to make the inner and outer tires of tires, as well as various accessories on tires, such as tread, tire side, etc.
2. Conveyor belt manufacturing industry: In the conveyor belt manufacturing industry, high quality bubbles cow mat is used to make the bottom and side of the conveyor belt to improve the elasticity and insulation properties of the conveyor belt.
3. Seal manufacturing industry: In the seal manufacturing industry, high quality bubbles cow mat is used to make various seals, such as O-rings, Y-rings, etc., which can play a good sealing effect.
4. Sports venues and amusement facilities: In sports venues and amusement facilities, high quality bubbles cow mat is used as a cushion, which can reduce the impact and damage to the body during exercise.
high quality bubbles cow mat https://www.sincererubbertech.com/Bubbles-Cow-Mats-for-your-livestock.html
The arc blade hedge trimmer operation is relatively simple, and the average user who has not used it can get up to speed quickly. Because the operation is simple, we should regulate the operation, because the simpler the easier it is to let people relax their vigilance. After all, arc blade hedge trimmer is a mechanical equipment, and non-standard operation may pose a threat to the user's personal safety.
Technical specifications for the operation of arc blade hedge trimmer
(1) The arc blade hedge trimmer should be checked before operation. Including but not limited to the tightness of the link part, the wear of the blade, the remaining power of the battery, etc.
(2) When working at a height above 3 meters from the ground, wear a soft cloth or rubber shoes, and be equipped with a safety belt (rope), and should tie tight pants (arc blade hedge trimmer is also used for high-altitude work, and some will trim some relatively high branches).
(3) When working at height, the staff under the tree should cooperate closely, the operator should notify the person under the tree before breaking the branch, the operator under the tree and remind the safety of passers-by (of course, the branches pruned with arc blade hedge trimmer are generally not too thick, and the trunk that is too thick should use a chainsaw). Only for branches around 3cm).
(4) The blade tip of the pruning scissors should be sharp, so as to facilitate the smooth cutting and ensure the healing of the stem wound. When thinning the branches, the full-rooted branches should be cut off without leaving stubble, so as not to form short ears.
(5) When pruning green plants, the hand speed should be smooth and fast, so that the effect of pruning is better.
(6) When the cut branches are thicker, the cut should not be flush with the raw branches, but should be slightly tilted outward to avoid excessive cuts.
The use of arc blade hedge trimmer for landscape greening and trimming has a strong long-term nature, and it is also a very interesting work. To do this job well, landscape workers must be able to endure hardships and endure loneliness, and at the same time, they need people's respect and protection. The effect of landscaping can be comprehensively improved, thus contributing to the construction of the entire city.
arc blade hedge trimmer https://www.keylead.cn/Electrical-Hedge-Trimmer-Arc-Blade-Supply.html