atomka's blog
Laser engraving is the art of using a powerful beam of light through optical magnification to leave stunning marks on hard surfaces, including ceramics, wood, and metal. The technique involves firing a high-energy beam of light at a targeted area to vaporize material and leave a permanently visible mark. Color changes can also be due to chemical reactions between the material and heat from the laser beam, foaming, charring or ablation.
The type of laser treatment depends on the material. On harder surfaces, such as titanium, the laser beam will ablate the surface. This means removing microscopic debris from the surface. By contrast, the beam burns through soft materials like wood and rubber.
Atomstack A10 Pro
The engraver is sold with five main components, packed in a small box. All the electronics are usually in one enclosure; you just need to unpack and reassemble the frame and connect the wires, power and data cables. Unless you've built a machine before, it takes about 45 minutes to read through the how-to manual and actually set it up. And because every wire and part is unique in design, you can't interchange connections or parts.
The frame and rods are made of high-quality steel, which is resistant to warping.
The machine runs on two quiet stepper motors. One is for the x-axis and the other is for moving the laser head along the y-axis. Focusing guides on the head move it along the Z axis, i.e. up and down according to the thickness of the material.
The A10 has two diode emitters instead of the one we often see in many atomstack laser engravers. The main diode points directly at the material. The other emitter is perpendicular to the main emitter, but as the beam bounces, the composite lens is tilted at a 45 degree angle. This bends the beam through a 90 degree angle, connecting the beam from the main diode. The result is a doubly powerful router.
With a 10W beam illuminating the surface, heat buildup is unavoidable. Luckily, a fan on top of the unit cools the area down.
The engraving machine is compatible with LightBurn and customized LaserBox Basics software, which receives data via USB data cable, Wi-Fi or TF card.
The Atomstack A5 Pro is a standard desktop engraver with a working surface area of approximately 252 square inches, a 5W module and a compression point. The compression spot houses several crystal-clear lenses that compress the coarse, weaker laser beam into a narrower but more intense beam. A more focused laser can easily tear through 0.5" thick wood. If you want a generous work area, the extension kit effortlessly extends the length from 21 inches to 33.5 inches.
In addition, the high-performance lightweight aluminum structure consisting of one-piece lead-screws flexibly forms the guide rail of the laser module. On a smooth pole, the laser module can cover 430 inches per minute. This impressive speed is useful when working on complex designs and time is not on your side.
The UV filtering acrylic on the laser module filters out up to 97% of UV rays making it safe for your eyes and skin. This feature also allows you to have a clear 180 degree view of what the machine is doing from above.
Finally, the Atomstack A5 is compatible with both Mac and Windows operating systems and software. You can use the free LaserGRB software or pay for an advanced design software called LightBurn. After coming up with a unique design, you can convert it to NC, BMP, JPG, PNG or DXF files. The machine has no problem with either of them.
Top choice for creativity: Atomstack laser engraver can engrave a variety of materials such as metal, wood, bamboo, plastic, leather PCB boards, aluminum oxide, lacquered metal, and more. You can make your own carvings according to your preferences, use your imagination
Excellent laser engraving technology: A5 Pro laser cutting machine has 5~5.5w output power, 0.16mm ultra-fine compressed laser focus area, engraving accuracy reaches 0.01mm, making the engraving process more fine, easy to cut wood and acrylic
180° Panoramic Viewing: The UV-resistant acrylic on the laser module can filter 97% of ultraviolet rays, protecting your eyes and the people around you. The specially designed 180° panoramic viewing area allows you to appreciate your work
High-performance structural design: Atomstack A5 40W machine design, integrated screw rod, the fastest running speed can reach 11000/min, more stable and flexible when engraving complex patterns, allowing you to obtain better results more easily.
Are you in the market for a laser engraver? Laser engraving equipment is used in arts and professional crafts to add value. However, technical knowledge is required to buy, as no one wants their investment to go to waste.
So read on for a curated guide to laser engravers and their compatibility to create the most exciting designs in the world!
Everything About Laser Engraving Machine Before Buying
How much does a laser engraving machine cost?
The prices of laser engraving machines on the market vary. Low-standard equipment costs less than $300. However, the high-end and most luxurious laser engravers have a sticker price of $50,000.
The price of an engraving machine depends on performance, features, specifications and materials. If the above factors are met, the price will be high.
Do laser engravers work on wood?
The most commonly used material in laser engraving is wood. It will cut and carve materials perfectly. Wood is a compatible material because it is cost-effective. Therefore, trial costs are minimized. In addition, its internal structure also complements laser cutting technology.
How to choose the best atomstack laser engraving machine?
The first variable to consider is budget. You can browse the marketplace, forums and discount offers online to find the product that best suits your needs.
You must also have enough space to host the machine. Laser engravers come in all sizes. So make sure they can also fit through narrow doors or stairs.
Third, study the plate size suitable for atomstack a10 pro laser engraving machine design. There are delivery variants that provide convenience.
Engraving equipment emits lasers of varying wattages - cost increases with wattage. However, also consider combinations cut by quality.
Other factors to consider are warranty, autofocus, Z-axis rotation, and lenses.
Atomstack A5 pro Laser Engraving Machine
How about gifting a laser engraver this holiday season? A5 pro laser engraver provides stable resolution and excellent engraving results. The machine is DIY and takes less than 20 minutes to install. Here's all about it:
The manufacturer offers 1 month returns, 12 months free maintenance, and a quick response in less than a day.
A built-in fan prevents the laser from defocusing due to smoke ventilation.
The ultra-fine laser provides deep cuts for easily engraving metal, ceramic and wood.
Metal construction adds accuracy and completes projects in under 30 minutes.
The laser engraver offers a 15.74 x 16.1-inch surface and 5.5 watts of power.
The A5 pro 40W laser machine can engrave plastic leather, ceramic and metal.
The laser engraver is compatible with LaserGRBL and Lightburn.
Finally, the device is compatible with SVG, DXF, BMP, JPG and PNG formats.
The design of the atomstack a5 pro laser engraver will invite you to experiment.
The printer is sturdy and durable after installation.
Laser engravers provide high performance results.
It is compatible with a wide variety of surfaces and material types.
Axis scales contribute to high precision.
