The working principle and process of Full Automatic Hydraulic Machine from exoltechcom's blog

With the development of the manufacturing industry, the production level of the machinery industry continues to improve, people's requirements for CNC machine tools are getting higher and higher. Full Automatic Hydraulic Machine is a kind of machine tool mainly controlled by digital program, which aims to convey digital instructions to the electronic control system to achieve accurate adjustment of motion control. The basic construction includes the headstock, cutting bed, positioning system and hydraulic control system, in which the headstock is responsible for transferring power to the tool, the horizontal and vertical axes are responsible for rotating the workpiece to various angles, the positioning system is responsible for positioning and position detection, and the hydraulic control system is used to drive and control various workflows.

The workflow mainly includes:

1. Boot link: After boot, it is necessary to carry out self-check function to confirm that the components are connected and work normally. In addition, it is necessary to set various parameters such as tool radius, number of workpieces, rotation direction, etc.

2, processing link: the processing of the workpiece is divided into multiple steps, such as: select the appropriate tool, processing depth and parameters, rotation direction, cutting speed and so on. According to the set processing program, the control system starts the servo drive to control the motor on each shaft, and locates and controls it through the computer instruction. The CNC system controls the servo system of the machine tool to run automatically according to the preset program, including feed, tool change, machining and other processes. In the process, the spindle rotates quickly and at high speed, ensuring efficient cutting.

3, feedback and adjustment: the CNC system will detect the status and position of the workpiece in real time, while collecting the relevant information in line with the processing, and automatically adjust the processing according to the feedback results to ensure the processing accuracy and consistency.

4, complete the processing task: wait until the completion of the operation, through manual inspection and quality detection, and finally ensure that the workpiece meets the design requirements. If the machining is not qualified, the operator will formulate appropriate adjustment measures and re-process.

Full Automatic Hydraulic Machine https://www.zjshuangzheng.com/Full-Automatic-Hydraulic-Machine-Tapping-Type-SZ-CZ-50S.html