troubleshooting tips for automatic cnc pipe end forming mach What faults are prone to occur in long-term use and how to solve them? from exoltechcom's blog

At present, the main troubleshooting tips for automatic cnc pipe end forming mach varieties on the market mainly include automatic CNC hydraulic bending, semi-automatic CNC hydraulic bending and manual CNC hydraulic bending. CNC hydraulic bending and automatic CNC hydraulic bending are suitable for production projects with large output, semi-automatic CNC hydraulic bending is suitable for projects with large total output, and manual CNC hydraulic bending has the advantage of being easy to carry and convenient for field operation projects. CNC hydraulic pipe bending equipment will inevitably fail in the process of long-term use.

We will maintain and eliminate the following two faults:

First, the fault acting rod ejection is weak, can not bend the pipe.

First, check whether the steel ball in the switch falls off. troubleshooting tips for automatic cnc pipe end forming mach. Secondly, tighten the switch of CNC hydraulic bending equipment clockwise. If the fault persists, check that the hydraulic oil in the tank is full and fill it. Or loosen the bolt on the refueling port. Replace the YX-shaped polyurethane sealing ring in the plunger pump of CNC hydraulic bending equipment to eliminate the air in the fuel tank and eliminate the fault.

Two, cnc hydraulic troubleshooting tips for automatic cnc pipe end forming mach oil leakage.

If it is large, the main reason for the oil leakage of the piston rod of the small pump is the damage of the seal ring; Therefore, if such a failure occurs, first check the sealing ring for automatic cnc hydraulic troubleshooting tips for automatic cnc pipe end forming mach for damage. If damaged, reinstall a set of seals. If the switch leaks oil, the main reason is that the pressure in the switch is too loose; After removing the lower limit screw and switch, tighten the pressure ring. If the top rod of CNC hydraulic pipe bending equipment leaks oil; The main reason is that the top sealing ring of the piston rod of the CNC hydraulic pipe bending equipment is damaged; The sealing ring needs to be replaced.

troubleshooting tips for automatic cnc pipe end forming mach https://www.john-sheng.com/Discover-Automatic-CNC-Pipe-End-Forming-Machines-Advantages-Selection-Guide.html