Selection and application of din 41612 type e connectors manufacturer from exoltechcom's blog

Select the appropriate mounting method depending on the space used and the mounting position (front and rear mounting, quick locking of screws, clings, rivets or din 41612 type e connectors manufacturer itself, etc.). Select the appropriate mounting method depending on the space used and the mounting position (front and rear mounting, quick locking of screws, clings, rivets or din 41612 type e connectors manufacturer itself, etc.). General signal transmission has no special requirements for the impedance of the din 41612 type e connectors manufacturer.

din 41612 type e connectors manufacturer plug-ins are widely used electronic components in modern manufacturing and are particularly important for improving manufacturing processes. In everyone's production activities, it goes without saying that the din 41612 type e connectors manufacturer is for electronic devices. An electronic product without a din 41612 type e connectors manufacturer is useless. Although they are the main body, and the din 41612 type e connectors manufacturer is only an attachment, their necessity is the same, especially when it comes to enabling the transmission of information in mechanical devices.

So how do you choose to apply din 41612 type e connectors manufacturer?

1. Structural size: The size of the din 41612 type e connectors manufacturer is very important. The connections in the product have certain space limitations, especially the din 41612 type e connectors manufacturer on the single board, and cannot be interfered with other components. Select the appropriate mounting method according to the space used and the mounting position (front and rear mounting, quick locking of screws, clings, rivets or din 41612 type e connectors manufacturer itself, etc.). And shape (straight, curved, T-type, round, square).

2. Matching resistance: Some signals require impedance, especially RF signals, which require more stringent matching resistance. When the impedance is not matched, it will cause signal reflection, which will affect the signal transmission. General signal transmission has no special requirements for the impedance of the din 41612 type e connectors manufacturer.

3. Shielding: With the development of communication products, electromagnetic compatibility has received more and more attention. When selecting the din 41612 type e connectors manufacturer, there needs to be a metal housing, and the cables need to have a shielding layer to connect to the metal housing of the din 41612 type e connectors manufacturer, To achieve the effect of shielding. The cable shield can also be wrapped in copper.

4. Anti-insertion: Anti-insertion has two aspects: On the one hand, the din 41612 type e connectors manufacturer itself is rotated 180 degrees, and the din 41612 type e connectors manufacturer is connected incorrectly, resulting in an incorrect signal connection. At this time, take care to select the din 41612 type e connectors manufacturer to avoid incorrect insertion as much as possible, or make the installation unique by adjusting the relative position of the din 41612 type e connectors manufacturer; On the other hand, in order to reduce the type of material, several signals use the same din 41612 type e connectors manufacturer, and then there may be A plug B situation. It should be noted that if this situation will lead to serious consequences (not A simple alarm, but devastating), then A and B must choose different types of sockets.

5. Reliability of din 41612 type e connectors manufacturer :din 41612 type e connectors manufacturer is used to connect signals, so the connection part should be reliable (such as surface contact is better than point contact, Pinhole than plate spring, etc.).

6. Use environment: When din 41612 type e connectors manufacturer is used in outdoor, indoor, high temperature, high humidity, salt spray, mildew, cold and other environments, there are special requirements for din 41612 type e connectors manufacturer.

7. Practicality: In the process of selecting din 41612 type e connectors manufacturer, try to select common parts, especially between the same product series. The selection of din 41612 type e connectors manufacturer is very practical and can reduce the variety of materials, increase the quantity, reduce costs and reduce supply risks.

din 41612 type e connectors manufacturer https://www.kujunconnector.com/TYPE-E-Connectors