User blogs

Glass laser engraving projectsOne of the most popular and widely used glass engraving techniques is sub-surface laser engraving, which is used to make 3D crystals or bubble patterns, and they are in high demand.Lenses that provide a spot smaller than 0.08" are preferred and, at a minimum, you will need 20W of laser power in a diode laser to process the glass.When working with glass, be careful to provide a lower resolution image, as it helps to engrave each spot at the best distance and prevents the glass from breaking suddenly.You c... more

Rubber Laser Engraving ProjectsThe most common rubber project made on Sculpfun laser engraver is the rubber stamp.https://www.htpow.net/sculpfun-s10-10w-laser-engraver-with-high-speed-air-assist-nozzle You can use 20W of Sculpfun S30 Pro Max laser power for smooth cutting on rubber. You have to adjust the power and speed to the quality and thickness of the rubber.https://www.htpow.net/90w-sculpfun-s9-laser-engraver-cnc-laser-cutting-engraving-machine After engraving, you must clean the laser lens with a cotton swab and isopropyl al... more

Laser TubeThe laser tube is the consumable of the laser engraver, so the service life has become the most important purchase index for users. How long can the laser tube work continuously? Many users work 8 to 10 hours a day with their laser engravers. In fact, the damage to key components such as laser tubes is very large. The laser tube that should have been used for more than a year was scrapped after half a year. Buy laser tubes from a reputable source (HTPOW can be your trusted mall), and you can expect the actual pow... more

Speaking of glass engraving, many people will think of the process of glass engraving "laser engraving technology". Laser engraving technology refers to the use of computer control technology as the basis of laser micro-processing medium to make the physical deformation of glass instantaneously melted and gasified under laser irradiation, so as to achieve the purpose of engraving patterns. A laser engraver is an implementation of this technology, and we recommend the Sculpfun laser engraver for a personal hobby or... more

As the original traditional cutting method, flame cutting has low requirements for processing quality in the past due to low investment. When the requirements are too high, it can be solved by adding a machining process, and the market share is very large.Now it is mainly used for cutting thick steel plates over 40mm. The disadvantage is that the thermal deformation is too large, the slit is too wide, the material is wasted, the processing speed is too slow, and it is only suitable for rough machining.Plasma cutting has become the ma... more