Automatic
Blow Moulding Machine price Vfine plastic bottle making Machine full
automatic, full servo system Application scope Full automatic blow molding
machine is suitable for producing PETplastic containers and bottles in all
shapes. It is widely used to produce the carbonated bottle, mineral water,
pesticide bottle cooking oil bottle, chemical product container, cosmetics,
wide-mouth bottle and hot fill bottle etc. Features of main blowing machine 1).
Stable performance with advanced PLC. 2). Automatic preform conveyer to save
human cost. 3). Preform self-rotation and infrared pre-heater revolution assure
the even distribution of heat, which improve the bottle shaping rate, increase
the production. 4). High adjusting performance to enable preheat the preforms
perfectly by adjust the voltage control area in the PLC, which could adjust the
temperature of the infrared lights in the pre-heater, and keep the proper
temperature and humidity invariable. 5). High safeties with security
automatic-locking device in each mechanical action, which will make the
production into a perfect safe environment, in case of the breakdown in certain
procedure. 6). Satisfaction with different atmospheric pressure for blowing and
mechanical action by dividing the blowing and action into three parts in the air
pressure diagram of the machine. 7). Strong clamping force with high pressure
and double crank links to lock the mould. 8). Two ways of operating: automatic
and manual. 9). Low cost,high efficiency,easy operation and maintenance etc,
profited from the fully automatic technological process. 10). Ideal cooling
system make the finished bottles without any flaws. 1.1 New Auto Preform
Unscrambler System. *Adopts one-way preform-feeding structure and
preform-separating by servo motor structure which solve the preform block and
abrasion problem. *There are two photoelectric sensors to control
preform-loading motor and preform-separating cylinder that will warn the
operator to add the preforms into the hopper when lacks preform instead of
stopping the machine. 1.2 New Heating System. *Perfect heating system design
decrease power consumption. *Special oven design helps power saving and easy
maintain. *Each lamp position and temperature can be adjusted from screen.
*Cycling water-cooling system keeps the oven temperature constantly. 1.3 The
Application Of Servo System On Main Transmission. The transmission adopts
servomotor for positioning that can orientate the preform-heating base quickly,
accurately and steadily when the machine starts and running. 1.4 Servo
Technology Innovation On Clamping System & Stretching. *Adopts servo motor
to drive the two cranks to control the clamping system which can shorten the
mold-clamping time and improve productivity, and also solve the swelling mold
and big joint line problem with the effect of pressurize plate. * Servo motor
using for stretching to ensure the bottle blowing speed faster and more stable
bottle quality. 1.5 Easy To Change Bottle Shape. *Drawer type mold structure
design is easy for mold changing. Within 30minutes can change a mold on the
condition of same bottleneck diameter. 1.6 Intelligent Human-Machine Interface.
*Human-machine interface control, easy operate and monitor. *Live production
information supervise, auto record production data everyday
ItemYF-4LEYF-6EYF-6LEYF-9E Cavity Number4669 Machine
output5500-6000bph8500-9000Bph8500-9000bph12000-13000bph Max.
volume2L0.75L2L0.75L Bottle mouth maximum diameter18-38mm18-38mm18-38mm18-38mm
Bottle maximum diameter105mm70mm105mm70mm Bottle maximum
height330mm260mm330mm260mm total power/ Installation power69KW53KW98KW76 Actual
power consumption25-28KW28-35KW30-35KW40-45kw operating pressure7kg7kg7kg7kg Low
pressure air consumption1500L/min1500L/min1500L/min1500L/min High pressure air
pressure25-35kg/cm225-35kg/cm225-35kg/cm225-35kg/cm2 Higher pressure air
consumption5000Ltr/min7000Ltr/min8000Ltr/min10000 Ltr/min Chilling water
pressure2-6 kg/cm22-6 kg/cm22-6 kg/cm22-6 kg/cm2 Temperature
range10-12鈩?/p>10-12鈩?/p>10-12鈩?/p>10-12鈩?/p>
Consumption45000kcal/hr45000kcal/hr54000kcal/hr54000kcal/hr Chilling water flow
rate150L/min150L/min180L/min180L/min Size of the
machine(L*W*H)4x2.15x2.54x2.15x2.55.5x2.15x2.55.5x2.15x2.5 Weight of the
machine6.5ton6.5ton8ton8ton Machine details 1)Oil free preform transferring
unit, no concern about the preform polluted in transferring unit when heated.
2)World famous brand Germany origin components for whole air system; World
famous brand servo system, and electrical system. 3)High quality of machine
frame and main plates, ensure at least 15years lifetime. 4)Slight and silent
clamping unit, ensure nice working environment for operators 5)+/-3% heating
output difference only for the heating oven, ensure the stable preform heating
for stable product quality. Single line preform infeeding unit, no need concern
about the preform jam.Automatic Blow Moulding Machine price
website:http://www.vfine-machinery.com/blow-molding-machine/automatic-blow-moulding-machine/
The Wall