Laser Cutter: Know Before You Buy from dan lina's blog

Have you been looking for a laser engraver cutter but don't know where to start? You've probably seen a lot of different information and opinions that vary widely, so it's perfectly understandable if you're confused. There are a few key factors you need to consider before buying. In this article, we'll outline these factors so you can make an informed decision when shopping for a laser cutter that suits your needs.

Laser cutter: how will you use it?
The first thing you have to do is figure out what you want to do with your laser cutter and engraver. You probably already know what you want to do with a laser cutter, or a specific workflow that could benefit from it, but there are a few things you should know and consider first.

Laser Cutter: What Materials Will You Use?
You need to consider all the materials you want to use inside your laser cutter. Some materials work with one type of laser cutter, but may not work with other types of laser cutters. So gather a list of all the materials you want to use so you can be sure that the atomstack laser cutter you get will work with them.

Fiber lasers will be the best choice for metal laser cutting machines. These are more specialized machines, so there will be more restrictions on what you can do. These lasers will not engrave or cut what a CO2 laser can cut, any more than a CO2 laser can cut or engrave metal. If you want to engrave metal, a 20W or 50W galvo fiber will work well. The power you need will depend on how deep you want to carve.

If you're looking for an industrial-grade laser cutter for metal, you can get something like a kilowatt flat fiber that cuts metal like butter. Atomstack a10 pro lasers are only the size of a large truck, and they do cost more, but they can provide a decent return on investment (ROI).

Another popular technique is the UV laser. These lasers won't really cut any material, but they can mark almost any material you have. These look like fiber galvanometers at first glance, but they are significantly faster and capable of marking very fine details. UV lasers are ideal for marking, but keep in mind that they cannot cut most materials or make deeper engravings.

You need to check exactly what you want to do with the atomstack a5 pro laser cutter and understand the dimensions you need to fit in and consider the space you have available to install the laser system. The P-Series starts with a 20"x12" workspace and goes all the way up to 48"x36". These lasers also feature front and rear access doors that allow you to engrave longer materials. So if you have something long but not too tall, you can still use one of these units.