What Are The Advantages Of Laser Cutting Machine Compared With Flame Cutting And Plasma Cutting? from Miao Xu's blog

As the original traditional cutting method, flame cutting has low requirements for processing quality in the past due to low investment. When the requirements are too high, it can be solved by adding a machining process, and the market share is very large.

Now it is mainly used for cutting thick steel plates over 40mm. The disadvantage is that the thermal deformation is too large, the slit is too wide, the material is wasted, the processing speed is too slow, and it is only suitable for rough machining.

Plasma cutting has become the main force of cutting precision, but also a large number of flame cutting precision. The actual cutting accuracy of the domestic top CNC fine plasma cutting machine has reached the lower limit of laser cutting.

When cutting 22mm carbon steel plate, the cutting speed is above 2m per minute, the cutting end face is smooth and flat, and the optimum slope can be controlled within 1.5 degrees. The disadvantage is that the thermal deformation is too large when cutting thin steel plates, the slope is large, there is nothing to do when the precision is high, and the consumables are expensive.

Sculpfun laser engraver is a technological revolution in sheet metal processing and a "machining center" for sheet metal processing. Laser cutting has high flexibility, fast cutting speed, high production efficiency and short production cycle, which has won a wide range of markets for customers.

The Sculpfun S30 Pro Max laser cutting machine has no cutting force and no deformation during processing; no tool wear and good material adaptability; whether it is a simple part or a complex part, the laser can be used for one-time precision rapid prototyping cutting; narrow cutting seam, cutting quality Good, high degree of automation, simple operation, low labor intensity, no pollution. It can realize automatic nesting and nesting of cutting, improve material utilization rate, low cost and good economic benefit. The technology has a long effective life.

At present, Sculpfun S10 laser cutting is widely used in foreign superstructure 2mm sheet. Many experts agree that the next 30-40 years will be a golden age for the development of laser processing technology.

From the comparison of the above laser cutting machine, flame cutting and plasma cutting, the laser cutting machine should perform better in sheet metal cutting in terms of cutting accuracy, processing speed, and processing diversification. Therefore, more and more sheet metal manufacturers will go to the HTPOW website to choose laser cutting machines.